|
SMXDZ0W502V0 Zener Diode, 2V ±1%,500mW same as On Semiconductor MMSZ4679T1 manufactured by Semiconix Semiconductor - Gold chip technology for known good die, flip chip, bare die, wafer foundry for discrete semiconductors, integrated circuits and integrated passive components from Semiconix Semiconductor
SMXDZ0W502V0 Zener Diode, 2V ±1%,500mW same as On Semiconductor MMSZ4679T1 manufactured by Semiconix Semiconductor - Gold chip technology for known good die, flip chip, bare die, wafer foundry for discrete semiconductors, integrated circuits and integrated passive components from Semiconix Semiconductor /images/watermark.gif);background-position: center center;background-repeat: repeat-y;"> REGISTER-LOGIN PRODUCTS CROSS REFERENCE /cgi-bin/stock.pl?part=SMXDZ0W502V0">INVENTORY /cgi-bin/rfq.cgi?site=4&rows=1&item_1=SMXDZ0W502V0&c_item_1=Zener%20Diode,%202V%20%201%,500mW">REQUEST QUOTE smxrootwww.semiconix.com/cgi-bin/order.cgi?site=">ORDER ONLINE SITE MAP semiconix semiconductor - where the future is today - gold chip technology SMXDZ0W502V0 - BARE DIE GOLD CHIP TECHNOLOGYâ„¢ Zener Diode, 2V ±1%,500mW FEATURES APPLICATIONS ZENER DIODE - BARE DIE High reliability bare die Gold metallization RoHS compliant, Lead Free Compatible with chip and wire assemblies Available with top cathode or top anode Chip on Board System in package SIP Hybrid Circuits Automotive, Biotechnology, Computers, Military, Medical, MEMS, Optoelectronics, Space, Telecommunications Smart Cards, RFID, PDA, Laptops, Mobile phones SMXDZ0W502V0 Zener Diode, 2V ±1%,500mW ZENER DIODES - PRODUCT DESCRIPTION Zener diodes are p-n junction diodes. From the point of view of breakdown mechanism, true Zener diodes are only diodes with reverse breakdown voltage less than approximately 5.6V. Diodes with breakdown voltage >5.6V are in fact avalanche diodes. Zener diodes are used in simple shunt voltage regulators circuits, reference voltage, and for ESD protection. Zener diodes BD series are available in die form in two configurations, Top Cathode XXXX-BD or Top Anode XXXXA-BD. In die form, these products are ideal for high reliability hybrid circuits and multi chip module applications. HIGH RELIABILITY BARE DIE AND SYSTEM IN PACKAGE - SHORT APPLICATION NOTE COB (Chip on Board) and SiP (System-in-Package) are integrating proven mature products in bare die of mixed technologies i.e. Si, GaAs, GaN, InP, passive components, etc that cannot be easily implemented in SOC (System-on-Chip) technology. COB and SiP have small size footprint, high density, shorter design cycle time, easier to redesign and rework, use simpler and less expensive assembly process. For extreme applications the bare die has to withstand also harsh environmental conditions without the protection of a package. KGD, Known Good Die concept is no longer satisfactory if the die cannot withstand harsh environmental conditions and degrades. Standard semiconductor devices supplied by many manufacturers in bare die are build with exposed aluminum pads that are extremely sensitive to moisture and corrosive components of the atmosphere. Semiconix has reengineered industry standard products and now offers known good die for bare die applications with gold interconnection and well-engineered materials that further enhance the die reliability. Semiconix also offers Silicon Printed Circuit Board technology with integrated passive components as a complete high reliability SIP solution for medical, military and space applications. See AN-SMX-001 DISCRETE SEMICONDUCTORS MANUFACTURING PROCESS Discrete semiconductors are manufactured using Semiconix in house high reliability semiconductor manufacturing processes. All semiconductor devices employ precision doping via ion implantation, silicon nitride junction passivation, platinum silicided contacts and gold interconnect metallization for best performance and reliability. MNOS capacitors, Tantalum Nitride TaN or Sichrome SiCr thin film resistors are easily integrated with discrete semiconductors on same chip to obtain standard and custom complex discrete device solutions. ABSOLUTE MAXIMUM RATINGS @ 25°C unless otherwise specified PD Power Dissipation 500 mW Tstg Storage Temperature Range -55 °C Tj Maximum Junction Temperature 150 °C ELECTRICAL CHARACTERISTICS @ 25°C unless otherwise specified Symbol Parameter Value Unit Min. Typ. Max VZT Zener Voltage @ IZT= [mA] 1.9 2 2.1 V IR Current leakage @ VR = 1.00 [V] 5 µA SPICE MODEL CROSS REFERENCE PARTS: GENERAL DIE INFORMATION Substrate Thickness [mils] Die size [mils] Bonding pads Backside metallization Silicon 6±1 25x25±2 Pad metal is TiW/Au, 4µm±1 thick, 99.99% electroplated gold with TiW barrier. Custom metallization available upon request. P/N Metal Die attach process -BD0 Au/Si Au/Si eutectic -BD1 Ti/Pd/Au AuSn,AuGe -BD2 Ti/Pt/Au AuSn,AuGe -BD3 Ti/Ni/Au Soft Solder SAC -BD4 Ti/Pt/AuSn AuSn eutectic LAYOUT / DIMENSIONS / PAD LOCATIONS Click to select image: TOP CATHODE TOP ANODE top cathode SMXDZ0W502V0 On Semiconductor MMSZ4679T1 Zener Diode, 2V ±1%,500mWtop anode SMXDZ0W502V0 On Semiconductor MMSZ4679T1 Zener Diode, 2V ±1%,500mW top cathode SMXDZ0W502V0 On Semiconductor MMSZ4679T1 Zener Diode, 2V ±1%,500mWtop anode SMXDZ0W502V0 On Semiconductor MMSZ4679T1 Zener Diode, 2V ±1%,500mW SMXDZ0W502V0 On Semiconductor MMSZ4679T1 Zener Diode, 2V ±1%,500mW SEMICONDUCTOR ASSEMBLY PROCESS - SHORT APPLICATION NOTE Semiconix standard bare die components are designed for thermosonic GOLD wire bonding and AuSi eutectic die attach. For AuSn or AuGe die attach process, Ti/Pt/Au or Ti/Pd/Au are recommended backside metallization. For soft solder die attach, backside metallization may be any of Ti/Ni/Au, Ti/Pt/Au, Ti/Pd/Au. For silver filled conductive epoxy die attach, AuSi as well as Ti/Ni/Au, Ti/Pt/Au, Ti/Pd/Au may be used. In general, after die attach, prior to wire bonding operation an oxygen RF plasma clean operation is recommended. IMPORTANT NOTE: Aluminum wire should not be used with gold pads due to potential reliability problem known as purple plague. Same it applies to Aluminum bonding pads with gold wire! In the transition from SnPb solder to lead free and RoHS compliant packaging and assembly processes the reflow temperature has increased in some cases from 180°C to 220°C. This may cause an increase of the rate of formation of gold aluminum intermetallic compounds that are brittle and are conducive to increased contact resistance and or bond failure. See Application note AN-SMX-000. STANDARD PRODUCTS ORDERING INFORMATION VERSION SMX P/N WAFFLE PACKS QUANTITY U/P($) FILM FRAME MIN QUANTITY U/P($) Top cathode SMXDZ0W502V0-BD -WP 10000 - -FF 13000 - Top cathode SMXDZ0W502V0-BD -WP 50000 - -FF 65000 - Top anode SMXDZ0W502V0A-BD -WP 10000 - -FF 13000 - Top anode SMXDZ0W502V0A-BD -WP 50000 - -FF 65000 - PRICES - Listed prices are only for standard products, available from stock. Inventory is periodically updated. List prices for other quantities and tolerances are available on line through Instant Quote. For standard products available from stock, there is a minimum line item order of $550.00. No rights can be derived from pricing information provided on this website. Such information is indicative only, for budgetary use only and subject to change by SEMICONIX SEMICONDUCTOR at any time and without notice. LEAD TIMES - Typical delivery for standard products is 4-6 weeks ARO. For custom devices consult factory for an update on minim orders and lead times. CONTINOUS SUPPLY - Semiconix guarantees continuous supply and availability of any of its standard products provided minimum order quantities are met. CUSTOM PRODUCTS - For custom products sold as tested, bare die or known good die KGD, there will be a minimum order quantity MOQ. Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For high volume and pick and place applications, dice are also shipped on film frame -FF. For special die level KGD requirements, different packaging or custom configurations, contact sales via CONTACTS page. SAMPLES - Samples are available only for customers that have issued firm orders pending qualification of product in a particular application. ORDERING - Semiconix accepts only orders placed on line by registered customers. On line orders are verified, accepted and acknowledged by Semiconix sales department in writing. Accepted orders are non cancelable binding contracts. SHIPING - Dice are 100% functional tested, visual inspected and shipped in antistatic waffle packs. For high volume and pick and place applications, dice are also shipped on film frame -FF. /cgi-bin/rfq.cgi" method="post" target="new"> INSTANT QUOTE Semiconix P/N Quantity E-mail DISCLAIMER - SEMICONIX has made every effort to have this information as accurate as possible. However, no responsibility is assumed by SEMICONIX for its use, nor for any infringements of rights of third parties, which may result from its use. SEMICONIX reserves the right to revise the content or modify its product line without prior notice. SEMICONIX products are not authorized for and should not be used within support systems, which are intended for surgical implants into the body, to support or sustain life, in aircraft, space equipment, submarine, or nuclear facility applications without the specific written consent. HOME PRODUCT TREE PACKAGES /cgi-bin/getpdf.pl?part=SMXDZ0W502V0&idx=2397">PDF VERSION SEARCH SEMICONIX SEMICONDUCTOR www.semiconix-semiconductor.com Tel:(408)986-8026 Fax:(408)986-8027 SEMICONIX SEMICONDUCTOR Last updated: Display settings for best viewing: Current display settings: Page hits: Screen resolution: 1124x864 Screen resolution: Total site visits: Color quality: 16 bit Color quality: bit © 1990- SEMICONIX SEMICONDUCTOR All rights reserved. No material from this site may be used or reproduced without permission.
|
